Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent designed to prevent the ingress of water. Due to the high level of fibres in Cromapol the coating will bridge small gaps and require only a one-coat application to give instant waterproofing.
- Application
- Clean all debris to ensure a dust-free surface. All moss and lichen must be removed using AlphaChem Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth.
- Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application. Gap or expansion joints greater than 3mm must be covered using Glass?Fibre scrim and Cromapol. This must be carried out prior to full coating.
- Cromapol will tolerate damp surfaces although as with any application for best results, Cromar recommends applying to a dry surface.
- Cromapol is easily applied using a brush, roller or squeegee.
- These application instructions are for guidance only and do not constitute any warranty for product performance.
Note: Due to the nature of the product, the brush used for the application cannot be cleaned and should be discarded after use.
Cromar Cromapol Acrylic Roof Repair Coating 5ltr
£42.00Price
Sales Tax Included
Colour
- Weight: 5kg
- Coverage: 1-2 kg per m2 on average.
Benefits:
- Excellent Adhesion ? Instant Protection
- No Wash?off
- Excellent Solar Reflectivity (White & Grey)
- Reinforced Membrane (excludes fibre free formula)
- One Coat Application ? Seamless
- Fully Flexible
- Economical
Technical Datasheet available to download here
- Clean all debris to ensure a dust free surface. All moss and lichen must be removed using AlphaChem Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth.
- Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application. Gap or expansion joints greater than 3mm must be covered using Glass?Fibre scrim and Cromapol. This must be carried out prior to full coating.
- Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface.
- Cromapol is easily applied using a brush, roller or squeegee.
- These application instructions are for guidance only and do not constitute any warranty of product performance
Limitations
- Cromar strongly recommends inspecting the surface and carrying out adhesion tests to any existing coating or substrate prior to the application.
- Not for use in areas where solvent or oil contact is likely, or on walkways, balconies, timber and new concrete.
- It is the users responsibilty to determine suitability for use. If in doubt please contact Cromars technical department on: 0844 8588186
- N.B. Slight oily separation may occur in unopened containers over 8 months old. This is normal, is easily stirred back into the product, and in no way affects its performance.
- It is the users responsibility to ensure suitability for use. Safety Data available on request.
- Read the label carefully for essential health and safety information prior to use.
