A solvent based, cold applied bituminous adhesive for bonding chippings to flat or low pitched roofs. The adhesive is supplied ready to use and must not be diluted or heated. It is designed to bond a wide variety of aggregates to built-up felt and mastic asphalt roof surfaces. It then provides a final solar reflective, weatherproof and damage resistant surface.
Chippings compatible with Cold Gritting Adhesive include:-
- Limestone
- Granite
- White calcined spar
- Flint
- Gravel
- Slate mineral chippings
- Colour: Black
- Method of Application:Cold Gritting Adhesive should be applied by stiff brush, mop or squeegee.
- To avoid thickening in coldweather, store Cold Gritting Adhesive in a warm room overnight prior to use.
Cromar Cold Gritting Adhesive 25ltr
SKU: ACG/601
£61.80Price
Sales Tax Included
Weight: 25kg Coverage per litre is dependent upon the size of the chippings to be bonded:-
- Chipping sized 3-9mm - 1.8m2 per litre
- Chipping sized 12mm - 1.3m2 per litre
Download the Cold Gritting Adhesive Data sheet here
- Cold Gritting Adhesive is suitable for roofs with up to a 10 deg slope. All surfaces must be free from oil, dirt, dust and loose debris. The surface should be preferably dry although the product may be applied to a damp but not wet or waterlogged surface. The compound should be spread evenly direct from the container in convenient areas of 20m2 at a time. Do not allow pooling of the solution or the covering to be too thin. The chippings should be applied immediately into the wet film. Care should be taken not to over-chip and to ensure that the chippings cover the film shoulder to shoulder. Proceed to the next 20m2 area. Leave the completed areas for at least 72 hours and then lightly brush off any excess chippings. Do not leave any blank film exposed.
